External Wall Insulation Survey Overview
External wall insulation can improve thermal performance and comfort, but its success depends on correct installation, weatherproofing and detailing. Our EWI inspections assess visible workmanship and accessible installation details, identifying potential weaknesses and practical recommendations. This inspection was allocated to a RICS and RPSA member with thermography certification and specific EWI experience.
Our External Wall Insulation Survey Approach
The survey began with a walkthrough to discuss the installation history and any homeowner concerns. Our surveyor inspected the finish and alignment, clearances above ground level, accessible insulation thicknesses, spirit-level checks, junctions around windows and doors, rainwater goods, sill projections, drip details and roof-edge terminations. These locations are important because small detailing defects can undermine the long-term performance of an otherwise effective system.
What the Survey Checked
- Finish, alignment and accessible insulation thicknesses
- Clearances above ground level and spirit-level checks
- Junctions around windows and doors
- Rainwater goods, sill projections and drip details
- Roof-edge terminations and other weatherproofing details
Thermal Imaging Assessment
An internal thermal imaging assessment supplemented the external inspection. The surveyor looked for unusual surface-temperature patterns, cold spots, thermal bridging at openings and structural junctions, and possible discontinuities in insulation. Thermal findings were interpreted alongside environmental conditions and building construction: an apparent cold spot does not, by itself, prove a defect.
Our Findings and Survey Report
The EWI system was found to have been installed to a good overall standard by an approved installer.





A detailed report followed, setting out observations, conclusions and any relevant recommendations. It gave the owners an independent record of the visible condition and assessed performance of the installation to share during the sale process. As a non-invasive inspection, it could not certify every concealed component.
Why an Independent EWI Survey Matters
An independent EWI survey is valuable when preparing to sell, assessing workmanship or investigating concerns about insulation performance. For these Hampton homeowners, the combined visual and thermal assessment provided reassurance and practical evidence about the works. Fitzgerald Surveying undertakes EWI and thermal imaging surveys across London and the South East.
Frequently Asked Questions
Homeowners in Hampton and across London often raise the same questions about insulation before a sale. The answers below explain what an external wall insulation survey with thermal imaging involves.
What is an external wall insulation (EWI) survey?
An EWI survey is an independent assessment of external wall insulation. It reviews the visible workmanship, weatherproofing and detailing of the system and sets out any practical recommendations.
Why get an EWI survey before selling your home?
It gives prospective buyers an independent record of how the insulation was installed and how it is performing, which can support questions that arise during the sale.
What does thermal imaging show on an EWI survey?
Thermal imaging highlights surface-temperature patterns, cold spots and thermal bridging that may point to gaps or discontinuities in the insulation, which are then interpreted alongside the building and the conditions on the day.
Can a thermal image on its own prove a defect?
No. An apparent cold spot can have several explanations, so thermal findings are read together with the construction and environmental conditions rather than taken as proof in isolation.
Does the survey certify the whole installation?
No. It is a non-invasive inspection of visible and accessible areas, so it cannot certify concealed components behind the finished system.
Why Choose Fitzgerald Surveying
Fitzgerald Surveying is an independent, family-run practice. Our EWI and thermal imaging surveys are carried out by experienced surveyors who are members of RICS, RPSA, CIOB and FODCS (Federation of Damp Certified Surveyors), with thermography certification where thermal work is involved.
Arrange an EWI Survey
Preparing to sell, or want to check the condition of external wall insulation in Hampton or elsewhere in London? Arrange an external wall insulation survey with thermal imaging from Fitzgerald Surveying Services.


